1″- 36″ Stock, Houston, TX / 1”-24” Stock, Midland, TX.
- Gasket Type: D, E, or F
- Gasket Material: Glass Reinforced Epoxy (G-10), Phenolic, G11, G3, or G7
- Seal Type: Teflon, Viton, Nitrile, or Buna
- Gasket Thickness: 0.125″
- Sleeves: G-10, Mylar, Integral Minlon, or Phenolic
- Washers (Double): G-10, Carbon Steel Zinc Plated, Hardened Steel, or Teflon Coated
- Note:
- Type D gaskets can be used with RTJ or API applications only.
- Type E gaskets can be used with Raised Face (RF) or RTJ applications.
- Type F gaskets are self-centering and can be used with Raised Face (RF) or RTJ applications.
- Please make sure to indicate if the gasket is needed for RTJ application when submitting RFQ to confirm that seal placement is correct.
QUICK FACTS
- Can be used in RTJ x RF Connections
- Can be utilized with misaligned flanges
- Can be used in place of RTJ or BX rings
- Low torque required
- No re-torquing required
- Sealing ring cannot be left out
- Seal design tested for high pressures
- Compensates for pressure fluctuations, compression changes, vibrations, temperature, variations, etc.
- Large selection of materials
- High dielectric strength (G10)
- Low installation and maintenance costs
- Gaskets through 144″
Copywrite Nwaj.Digital 2023